An office reception counter is a visitor's first impression of a company, so the stone must look impressive while surviving heavy daily traffic, cleaning and impacts. Design must address material, book-matching, lighting reveals, logo presentation and working hours, since most commercial towers only allow works outside office hours.
Use granite or quartz for counter tops, which resist scratching and wear, and marble on the fascia and backdrop for book-matched veining. Dark marbles such as Nero Marquina and Portoro feel prestigious; light marbles such as Calacatta and Statuario feel bright and contemporary. Consider the effect of cleaning agents and daily wiping on the surface.
Book-matched backdrops are the most striking, and light troughs or backlighting deepen the veining. Keep reveal edges flush and light distribution even, avoiding hot spots and dark patches, and ensure lamps can be replaced later.
Logos can be produced by waterjet inlay, brass or metal inlay, or etching, and can be backlit for emphasis. Reception counters benefit from built-up or bevelled edges for depth, and clean junctions between top and fascia.
Most towers only permit works outside office hours or at weekends, so coordinate with management early. Components should be prefabricated in the factory for rapid site assembly, followed by sealing and protection so later trades cannot scratch the stone.
Granite or quartz for the top because they resist scratching, and marble on the fascia and backdrop for book-matched veining. Dark marble feels prestigious, light marble bright; choose to suit brand image.
Yes. Common methods are waterjet inlay, brass or metal inlay and etching, optionally backlit, all factory-cut to drawing.
Most towers allow works only outside office hours or at weekends and require permits. Prefabricate in the factory for fast assembly and protect the finished stone afterwards.