Solid Surface · Seamless
Seven engineered varieties — quartz, acrylic solid surface, composite, marble-look, solid color, terrazzo and translucent. Homogeneous, seam-free and stain-resistant, the material of choice for kitchen worktops and integrated bespoke interiors.
Seven engineered stone varieties — quartz, acrylic solid surface, composite, marble-look, solid color, terrazzo and translucent — each available for selection and custom fabrication. Select any variety to open its dedicated page with samples, technical data and recommended applications.
From seamless corners and integrated basins to thermoformed curves and crystalline surfaces — the craft and the spaces engineered stone makes possible.
From homogeneous raw material to invisible jointing, engineered stone outperforms natural stone on consistency and design freedom.
Factory-controlled formulation means one color code stays visually identical across the whole slab — no veining surprises, no fissures.
Dedicated adhesive and graded sanding and polishing leave joints with continuous pattern and no detectable touch line across long runs.
Negligible capillary pores and water absorption as low as 0.02% keep soy sauce, red wine, coffee and oil from penetrating.
A pore-free surface does not harbour mould or bacteria, making it suitable for food contact, healthcare and laboratory areas.
Acrylic surfaces can be thermoformed into curves and integrated basins; scuffed areas can be sanded back to like-new.
Colour codes can be re-supplied long term — ideal for chains, hotels and multi-unit projects where color matching really matters.
See seamless jointing and mirror polishing up close
Hardness, water absorption, strength and renovate-ability side by side — pick the right material for the application.
| Variety | Composition | Mohs | Water Abs. | Compressive | Flexural | Heat | Renovate |
|---|---|---|---|---|---|---|---|
| Quartz Stone石英石 | >90% natural quartz crystal + resin | 6–7 | ≤ 0.02% | ≥ 180 MPa | 40–70 MPa | Excellent | No |
| Acrylic Solid Surface亞克力無縫石 | Mineral filler + MMA acrylic resin | 2.5–3.5 | ≤ 0.10% | ≥ 90 MPa | 45–60 MPa | Moderate | Sandable |
| Composite Stone複合人造崗石 | Stone powder + glass chips + resin | 5–6 | ≤ 0.05% | ≥ 150 MPa | 40–60 MPa | Good | Limited |
| Marble-look Stone大理石紋人造石 | Quartz / composite base + veined layer | 6–7 | ≤ 0.02% | ≥ 180 MPa | 40–60 MPa | Excellent | No |
| Solid Colour Stone純色人造石 | Homogeneous mineral filler + resin | 5–7 | ≤ 0.05% | ≥ 150 MPa | 40–60 MPa | Good | Limited |
| Terrazzo Stone水磨石人造石 | Cement / resin base + colored chips | 5–6 | ≤ 0.10% | ≥ 90 MPa | 20–40 MPa | Good | Sandable |
| Translucent Stone透光人造石 | Translucent resin + mineral filler | 4–6 | ≤ 0.05% | ≥ 100 MPa | 35–55 MPa | Moderate | Sandable |
From residential kitchens and bathrooms to commercial and specialist spaces — engineered stone handles every worktop and cladding brief.
Each finish gives engineered stone a different texture and performance profile — specify by application and design intent.
HENGSHENG MARBLE S&T CO. LIMITED delivers a single-source service covering material consultancy, detailing, precision fabrication and site installation.
Share your drawings or application; our consultants help you pick variety, color code and finish.
Precise remeasurement with shop drawings covering seamless jointing and edge details.
CNC cutting, waterjet cut-outs, thermoforming, invisible bonding and graded polishing.
On-site installation, seamless finishing and protection, then handover on acceptance.
The questions we are asked most often before a specification is confirmed.
Engineered stone is produced from natural quartz, mineral filler and resin under factory-controlled heat and pressure, so it has none of the fissures, color variation or inclusions of natural stone. It is homogeneous, has very low water absorption and high stain resistance, and can be fabricated into seamless long runs and integrated basins. Natural stone wins on one-of-a-kind veining; engineered stone wins on consistency and design freedom — the two are often combined in the same space.
Yes. We use a color-matched dedicated adhesive, align the pattern geometrically before bonding, then sand through a graded sequence and polish. The result is a joint where pattern and sheen continue across the bond line. Honed finishes and solid colors hide joints best; for strongly veined varieties we lay out the pattern first so the veining reads naturally across the join.
Very much so. Quartz varieties absorb as little as 0.02% water and resist scratching and staining, which is why they dominate kitchen worktops and islands. One caveat: varieties with higher resin content do not tolerate prolonged high heat, so use a trivet rather than placing a hot pan directly on the surface.
It depends on the brief. For hardness, scratch resistance and value on a straightforward worktop, choose quartz (Mohs 6–7, absorption ≤0.02%). For seamless sculptural work, thermoformed curves, integrated basins, or a surface that can be sanded back later, choose acrylic solid surface. The two are often combined in one kitchen — quartz for the worktop, acrylic for the bowl and curved sections.
Yes — we fabricate to drawings and site dimensions, including waterjet cut-outs, shaped profiles, thermoformed curves and integrated basins. Standard sizes in stock color codes take roughly 2–3 weeks; thermoforming, special color codes or large project volumes take roughly 3–5 weeks, confirmed against the production schedule once drawings are approved.
Interested in engineered stone (solid surface)? Leave your details and our stone consultants will reply within 24 hours with a tailored proposal.