HENGSHENG MARBLE S&T CO. LIMITED's Flow Mach 4C 5-axis dynamic waterjet systems operate at 94,000 PSI (6,500 atm), propelling garnet-laden water through a 0.3mm sapphire orifice at Mach 3 (~1,000 m/s). Five-axis motion (X/Y/Z + A tilt ±60° + C rotation ±360°) enables any-angle curved cutting. Advantages: cold cutting (zero heat-affected zone), ±0.025mm positioning, 200mm max thickness, Dynamic Waterjet® auto-compensation eliminating taper, 95% water recycling. Case study: a 120 sqm marble mosaic floor (3,000+ pieces) for a Dubai seven-star hotel completed in 18 days vs 45 days traditionally, with ±0.3mm joint precision. HENGSHENG MARBLE S&T CO. LIMITED operates 4 systems—one of Asia-Pacific's largest 5-axis waterjet centers—with 500,000+ annual capacity.
The Flow Mach 4C's secret is dynamic compensation: the cutting head self-adjusts against real-time jet spread, holding ±0.1 mm on the most complex curves — medallions and curved columns say goodbye to hand finishing.
Linked with BRETON CNC centers on the HENGSHENG MARBLE S&T CO. LIMITED line, shaped pieces run from model to finished goods in as fast as 48 hours. For designers, shapes that were once 'drawable but unmakeable' now need only one drawing review.
Water's power, constrained within a tenth of a millimetre — five-axis waterjet turned shaped stone from craft into science.
Talk to our consultants for material advice and project quotations.
Contact Us Our Solutions